When you buy speakers of any type, regardless of whether they’re wired or wireless, the primary characteristics that they seek are the loudness and the reliability of the speakers.
People are purchasing Bluetooth speakers with the advanced technology, yet, concentrate on high sound clarity and loudness.
Sometimes, regardless of how high the quality of a speaker may be, the volume just isn’t sufficient for the listener to receive the feeling of being present at the location where the music is being played.
Here’s what you must do to make your Bluetooth party speaker sound louder:
Determine The Space In The Room
Are you aware that simply utilizing your speakers in a room that is the suitable size will cause them to produce a louder volume? If you intend to use your Bluetooth speaker in a really large area with lots of open space, then you should not expect the speaker to perform perfectly.
The sound waves will disperse too far in all directions for a good hearing to be possible. As a result, the first thing you should do is evaluate the space’s overall dimensions.
After you have done so, you will be able to locate the optimal location at which to position the speaker. When you consider that sound reflects off of walls, this results in an increase in the overall volume of the sound.
On the other hand, a wide space won’t accomplish anything than make the sound go further away. You have control over the level of the Bluetooth speaker that is playing as you investigate the area.
A few models like Flare speakers are audible at a 50 feet distance. However, if your venue is bigger than this distance, then you can connect multiple Flare speakers to enjoy audio at a higher volume.
Use Your Floor
Your floor space can be used for a lot more things than simply dancing during the party; got any ideas?
In such a case, you should test it out as soon as possible using the Bluetooth speaker you have! Although it is not the most typical place for speakers to be placed, doing so is among the least complicated and most efficient ways to increase the volume level higher.
There is a rational explanation for this based on science. When a wireless party speaker is positioned so that it is resting on the ground, the natural flow of vibrations is enhanced.
The end product is sound that is unadulterated and unprocessed. At gatherings in which guests mingle and talk to one another, this is an effective method as well.
When it is positioned on the ground, background music can be played, but it will not be overpowering or too loud to prevent people from having conversations with one another.
In most cases, you will achieve the best results by positioning your Bluetooth party speaker on the ground in the exact center of the room.
Optimize Your Corners
Are you aware that the walls in your home might serve as an acoustic amplifier? If you don’t want to spend money on extenders, this is actually one of the most organic ways to increase the volume of your Bluetooth speaker.
If you position the speaker so that it faces the correct direction, you can experience up to a 25 percent increase in the maximum volume level.
This figure, however, might change depending on how far away you are from the wall as well as the material that your walls are made of. You should also take into consideration any furniture in the same area, such as couches, that could potentially warp or dampen the sound.
A room that is completely devoid of furniture is the optimum environment for listening to music, as this allows the vibrations produced by the speaker to reflect off of the walls and be magnified. It is preferable to have two walls (or a corner) if at all possible.
You may add up to forty percent more loudness to your Bluetooth speaker simply by positioning it on its side. Position your speaker at an appropriate distance to reiterate and boost the level of your music.
It is common sense that positioning it on the ground will produce superior outcomes.
Putting the Bluetooth speaker in a variety of positions around the room and listening to how it sounds is the simplest and most straightforward way to troubleshoot this issue.
By doing so, you will be able to locate, within the given space, the optimal location for obtaining a sound that is both crisp and loud.
Connect Multiple Speakers
It is possible that you will need a second speaker in the event as a single speaker is insufficient to meet your needs.
Connecting two or more speakers is the most straightforward approach to use if you have a sizable audience or a spacious venue in which a single speaker would be insufficient. You have the option of borrowing one if you do not routinely require the additional volume.
Possible Reasons For Low Volume
Your dissatisfaction with the sound quality may not be attributable to the speakers themselves but rather to other factors. It is possible that the music does not work well with the speaker or that it produces a sound that is uninteresting.
There could be a problem with the Bluetooth speaker itself. Check to see if the volume control is turned all the way up. Find the equalizer and audio settings on your speaker that work best for you.
If you have tried the preceding advice and are still not seeing any change, then there may be some other difficulties that an expert can inform you.
It is not possible for the Bluetooth party speakers to get any louder than the device’s maximum volume setting; however, experimenting with different ways to position the Flare speakers can result in improved amplification of the sound.
Individuals who listen to music through Bluetooth speakers should anticipate that as technology continues to grow, the speakers’ sound quality will improve, as will the level of satisfaction they provide to those who listen to music through them.